8G-Writer: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)
Volume
(Mbits/sec)
offered 15.81 0.92
measured 15.71 0.91
Load trace
load.trace.scope=sides=client__phases=inc1

The load table shows offered and measured load from client side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)
BHR
(%)
offered 59.61 41.98
measured 59.40 41.85

The hit ratios table shows offered and measured hit ratios from client side point of view. Polygraph counts every repeated request to a cachable object as an offered hit. Measured (cache) hits are detected using Polygraph-specific headers. All hits are counted for 'basic' transactions only (simple HTTP GET requests with '200 OK' responses).

DHR, Document Hit Ratio, is the ratio of the total number of hits to the number of all basic transactions (hits and misses). BHR, Byte Hit Ratio, is the ratio of the total volume (a sum of response sizes) of hits to the total volume of all basic transactions.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 18994.00 18871.00 26.20
waiting 8206.00 8105.00 10.83
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=client__phases=inc1

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 9238.00 9070.00 57.52
established 9238.00 9070.00 57.47
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=client__phases=inc1

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
75.00 0.00 38.45
population level trace
populus.level.trace.scope=sides=client__phases=inc1

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)
Volume
(%)
Count
(xact/sec)
Volume
(Mbits/sec)
Count
(xact,M)
Volume
(Gbyte)
"foreign" 0.00 0.00 0.00 0.00 0.00 0.00
"image" 61.73 40.45 9.67 0.37 0.01 0.05
"HTML" 14.69 9.80 2.30 0.09 0.00 0.01
"download" 0.19 7.51 0.03 0.07 0.00 0.01
"applet" 0.20 0.20 0.03 0.00 0.00 0.00
"other" 8.60 29.25 1.35 0.27 0.00 0.04
all content types 85.40 87.21 13.38 0.80 0.02 0.12
hits 50.73 36.49 7.95 0.33 0.01 0.05
misses 34.68 50.71 5.43 0.46 0.01 0.07
hits and misses 85.40 87.21 13.38 0.80 0.02 0.12
ims/200 5.63 6.35 0.88 0.06 0.00 0.01
ims/304 3.07 0.06 0.48 0.00 0.00 0.00
all ims 8.70 6.41 1.36 0.06 0.00 0.01
cachable 68.38 62.91 10.71 0.58 0.01 0.08
not cachable 17.03 24.30 2.67 0.22 0.00 0.03
cachable and not 85.40 87.21 13.38 0.80 0.02 0.12
fill 17.65 26.42 2.77 0.24 0.00 0.04
reload 5.46 5.20 0.86 0.05 0.00 0.01
abort 0.04 0.01 0.01 0.00 0.00 0.00
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.02 0.00 0.00 0.00 0.00 0.00
POST 0.41 1.19 0.06 0.01 0.00 0.00
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.43 1.19 0.07 0.01 0.00 0.00
all replies 100.00 100.00 15.66 0.91 0.02 0.13

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"foreign" n/a n/a n/a n/a n/a n/a
"image" n/a n/a n/a 0.32 4.90 44.15
"HTML" n/a n/a n/a 0.40 4.99 77.72
"download" n/a n/a n/a 48.13 293.23 818.01
"applet" n/a n/a n/a 2.98 7.47 9.48
"other" n/a n/a n/a 9.04 25.43 75.94
all content types n/a n/a n/a 0.32 7.63 818.01
hits 3.00 879.43 25045.00 0.41 5.38 635.03
misses 7.00 2617.15 21530.00 0.32 10.93 818.01
hits and misses 3.00 1585.03 25045.00 0.32 7.63 818.01
ims/200 4.00 1700.57 9293.00 0.34 8.43 818.01
ims/304 2.00 1684.94 5977.00 0.09 0.13 0.16
all ims 2.00 1695.05 9293.00 0.09 5.50 818.01
cachable 3.00 1329.37 25045.00 0.38 6.88 818.01
not cachable 7.00 2611.81 6110.00 0.32 10.67 236.41
cachable and not 3.00 1585.03 25045.00 0.32 7.63 818.01
fill 9.00 2622.30 21530.00 0.38 11.18 818.01
reload 14.00 2591.75 5796.00 0.34 7.11 206.85
abort 6481.00 7488.00 8600.00 0.46 2.45 6.45
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 20.00 1526.00 2310.00 0.32 0.38 0.41
POST 57.00 2575.28 6669.00 0.47 21.40 593.11
PUT n/a n/a n/a n/a n/a n/a
all non-gets 20.00 2536.42 6669.00 0.32 20.62 593.11
all replies 2.00 1653.69 25045.00 0.09 7.47 818.01

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' class) or '304 Not Modified' (the 'ims/304' class) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

The total of 26 errors detected. Out of those errors, 26xact or 0.14% of all transactions were classified as transaction errors.

Error Count Contribution (%)
(c17) connection closed before sending headers 26 100.00

The 'Errors' table shows detected errors. For each error type, the number of errors and their contribution towards total error count are shown.




9. Object '"foreign"'

No instances of this object class were observed or recorded in the given scope.


This object class represents one of the content types specified in the PGL workload file and labeled there as "foreign".


10. Object '"image"'

contribution: 61.73% by count and 40.45% by volume
rates: 9.67xact/sec or 0.37Mbits/sec
totals: 0.01Mxact and 0.05GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 4.90KBytes mean, and 44.15KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


11. Object '"HTML"'

contribution: 14.69% by count and 9.80% by volume
rates: 2.30xact/sec or 0.09Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.40KBytes min, 4.99KBytes mean, and 77.72KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


12. Object '"download"'

contribution: 0.19% by count and 7.51% by volume
rates: 0.03xact/sec or 0.07Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: n/a min, n/a mean, and n/a max
response size: 48.13KBytes min, 293.23KBytes mean, and 818.01KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


13. Object '"applet"'

contribution: 0.20% by count and 0.20% by volume
rates: 0.03xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: n/a min, n/a mean, and n/a max
response size: 2.98KBytes min, 7.47KBytes mean, and 9.48KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "applet".


14. Object '"other"'

contribution: 8.60% by count and 29.25% by volume
rates: 1.35xact/sec or 0.27Mbits/sec
totals: 0.00Mxact and 0.04GByte
response time: n/a min, n/a mean, and n/a max
response size: 9.04KBytes min, 25.43KBytes mean, and 75.94KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


15. Object 'all content types'

contribution: 85.40% by count and 87.21% by volume
rates: 13.38xact/sec or 0.80Mbits/sec
totals: 0.02Mxact and 0.12GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 7.63KBytes mean, and 818.01KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




16. Object 'hits'

contribution: 50.73% by count and 36.49% by volume
rates: 7.95xact/sec or 0.33Mbits/sec
totals: 0.01Mxact and 0.05GByte
response time: 3.00msec min, 879.43msec mean, and 25045.00msec max
response size: 0.41KBytes min, 5.38KBytes mean, and 635.03KBytes max
response time distribution
object.hits.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.hits.size.fig.scope=sides=client__phases=inc1
response time trace
object.hits.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




17. Object 'misses'

contribution: 34.68% by count and 50.71% by volume
rates: 5.43xact/sec or 0.46Mbits/sec
totals: 0.01Mxact and 0.07GByte
response time: 7.00msec min, 2617.15msec mean, and 21530.00msec max
response size: 0.32KBytes min, 10.93KBytes mean, and 818.01KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.misses.size.fig.scope=sides=client__phases=inc1
response time trace
object.misses.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




18. Object 'hits and misses'

contribution: 85.40% by count and 87.21% by volume
rates: 13.38xact/sec or 0.80Mbits/sec
totals: 0.02Mxact and 0.12GByte
response time: 3.00msec min, 1585.03msec mean, and 25045.00msec max
response size: 0.32KBytes min, 7.63KBytes mean, and 818.01KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.hits_and_misses.size.fig.scope=sides=client__phases=inc1
response time trace
object.hits_and_misses.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




19. Object 'ims/200'

contribution: 5.63% by count and 6.35% by volume
rates: 0.88xact/sec or 0.06Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: 4.00msec min, 1700.57msec mean, and 9293.00msec max
response size: 0.34KBytes min, 8.43KBytes mean, and 818.01KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.ims_sc200.size.fig.scope=sides=client__phases=inc1

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




20. Object 'ims/304'

contribution: 3.07% by count and 0.06% by volume
rates: 0.48xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 2.00msec min, 1684.94msec mean, and 5977.00msec max
response size: 0.09KBytes min, 0.13KBytes mean, and 0.16KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.ims_sc304.size.fig.scope=sides=client__phases=inc1

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




21. Object 'all ims'

contribution: 8.70% by count and 6.41% by volume
rates: 1.36xact/sec or 0.06Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: 2.00msec min, 1695.05msec mean, and 9293.00msec max
response size: 0.09KBytes min, 5.50KBytes mean, and 818.01KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.ims_scAll.size.fig.scope=sides=client__phases=inc1
response time trace
object.ims_scAll.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




22. Object 'cachable'

contribution: 68.38% by count and 62.91% by volume
rates: 10.71xact/sec or 0.58Mbits/sec
totals: 0.01Mxact and 0.08GByte
response time: 3.00msec min, 1329.37msec mean, and 25045.00msec max
response size: 0.38KBytes min, 6.88KBytes mean, and 818.01KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




23. Object 'not cachable'

contribution: 17.03% by count and 24.30% by volume
rates: 2.67xact/sec or 0.22Mbits/sec
totals: 0.00Mxact and 0.03GByte
response time: 7.00msec min, 2611.81msec mean, and 6110.00msec max
response size: 0.32KBytes min, 10.67KBytes mean, and 236.41KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




24. Object 'cachable and not'

contribution: 85.40% by count and 87.21% by volume
rates: 13.38xact/sec or 0.80Mbits/sec
totals: 0.02Mxact and 0.12GByte
response time: 3.00msec min, 1585.03msec mean, and 25045.00msec max
response size: 0.32KBytes min, 7.63KBytes mean, and 818.01KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'fill'

contribution: 17.65% by count and 26.42% by volume
rates: 2.77xact/sec or 0.24Mbits/sec
totals: 0.00Mxact and 0.04GByte
response time: 9.00msec min, 2622.30msec mean, and 21530.00msec max
response size: 0.38KBytes min, 11.18KBytes mean, and 818.01KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'reload'

contribution: 5.46% by count and 5.20% by volume
rates: 0.86xact/sec or 0.05Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: 14.00msec min, 2591.75msec mean, and 5796.00msec max
response size: 0.34KBytes min, 7.11KBytes mean, and 206.85KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.reload.size.fig.scope=sides=client__phases=inc1
response time trace
object.reload.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'abort'

contribution: 0.04% by count and 0.01% by volume
rates: 0.01xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 6481.00msec min, 7488.00msec mean, and 8600.00msec max
response size: 0.46KBytes min, 2.45KBytes mean, and 6.45KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




29. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




30. Object 'HEAD'

contribution: 0.02% by count and 0.00% by volume
rates: 0.00xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 20.00msec min, 1526.00msec mean, and 2310.00msec max
response size: 0.32KBytes min, 0.38KBytes mean, and 0.41KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.method_head.size.fig.scope=sides=client__phases=inc1
response time trace
object.method_head.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'POST'

contribution: 0.41% by count and 1.19% by volume
rates: 0.06xact/sec or 0.01Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 57.00msec min, 2575.28msec mean, and 6669.00msec max
response size: 0.47KBytes min, 21.40KBytes mean, and 593.11KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.method_post.size.fig.scope=sides=client__phases=inc1
response time trace
object.method_post.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




32. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




33. Object 'all non-gets'

contribution: 0.43% by count and 1.19% by volume
rates: 0.07xact/sec or 0.01Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 20.00msec min, 2536.42msec mean, and 6669.00msec max
response size: 0.32KBytes min, 20.62KBytes mean, and 593.11KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.method_all.size.fig.scope=sides=client__phases=inc1
response time trace
object.method_all.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




34. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 15.66xact/sec or 0.91Mbits/sec
totals: 0.02Mxact and 0.13GByte
response time: 2.00msec min, 1653.69msec mean, and 25045.00msec max
response size: 0.09KBytes min, 7.47KBytes mean, and 818.01KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=client__phases=inc1
object size distribution
object.rep.size.fig.scope=sides=client__phases=inc1
response time trace
object.rep.rptm.trace.scope=sides=client__phases=inc1

No description is available for this object class.